CS601-Midterm
1 / 50
In transmission, a start bit and a stop bit frame a character byte.
2 / 50
Which topology requires a central controller or hub?
3 / 50
Frequency band in which 99% of the total power resides is called_______
4 / 50
OSI model was developed prior to TCP/IP model.
5 / 50
A human brain is considered as a ___________
6 / 50
The internet model consists of layers.
7 / 50
is a multipoint topology.
8 / 50
A 56k modem can download at a rate of __________ Kbps and upload at a rate of __________ Kbps.
9 / 50
Set of rules that govern communication is called
10 / 50
The __________ generates the data and passes it along with any control information to a ___________.
11 / 50
In Alternate mark inversion the term mark comes from_________
12 / 50
requires the maximum number of I/O ports.
13 / 50
A sine wave must be an analog signal.
14 / 50
Effective network mean that the network has fast delivery, timeliness and
15 / 50
layer is the layer closest to the transmission medium.
16 / 50
Data link layer deals with mechanical and electrical specifications of transmission medium and interface
17 / 50
In mesh topology, if there are five nodes then there will be links.
18 / 50
A set of devices connected by communication links is called networking
19 / 50
Line configuration refers to the way two or more devices attach to a ______.
20 / 50
Quantization means measuring amplitudes of signal at equal intervals.
21 / 50
Data synchronization is a function related with ______
22 / 50
Analog to digital conversion is also termed as modulating an analog signal.
23 / 50
24 / 50
25 / 50
Amplitude in ASK is more resistive to EMI and Noise.
26 / 50
Asynchronous transmission is
27 / 50
Fourier transform tells us that any digital signal can be decomposed into infinite number of periodic signals
28 / 50
Line configuration refers to the way two or more devices attach to a .
29 / 50
PCM is the first process of PAM.
30 / 50
Data chunk at data link layer is called
31 / 50
32 / 50
Which is not an element of protocol
33 / 50
Which one is not among standard creation committee.
34 / 50
Asynchronous transmission is ___________
35 / 50
3dB is also called as power bandwidth.
36 / 50
representation of links that connect nodes is called as physical topology.
37 / 50
Data synchronization is a function related with ___________
38 / 50
In 8QAM each signal shift or one baud represents __________
39 / 50
The _______________ layer changes bits into electromagnetic signals.
40 / 50
Which one best describes the given statement: "To allow multiple users to share total capacity of a transmission medium"
41 / 50
ASK, PSK, FSK and QAM are examples of ____ modulation.
42 / 50
43 / 50
44 / 50
A modulator converts a(n) ____________ signal to a(n) ____________ signal.
45 / 50
Internet with small “i” specifies the world wide Network the actual internet.
46 / 50
There are _____ possible variations of 16 QAM.
47 / 50
DC component is also termed as Direct current component or a component with non-zero frequency.
48 / 50
The bit rate always equals the baud rate in which type of signal?
49 / 50
Non proprietary standard is also termed as de facto standard.
50 / 50
Unidirectional traffic movement is overcome by dual ring technology.
Your score is
The average score is 56%
Restart quiz
