Materials and Construction Quiz 7
1 / 50
Tempering of steel is done to make it_________?
2 / 50
Softness of silver can be converted into hardness by alloying it with small quantity of__________?
3 / 50
Spark plugs are made of________?
4 / 50
Stainless steel is not corroded by _______?
5 / 50
Sulphuric acid is mixed with ground phosphate rock (to produce phosphoric acid) in a steel digestor lined with_______?
6 / 50
Presence of cobalt in steel improves its______?
7 / 50
Presence of silicon in steel_______?
8 / 50
Teflon (PTFE) is corroded by________?
9 / 50
Presence of nitrogen in steel_____?
10 / 50
Tank furnace used for melting of glass is made of_____?
11 / 50
Softening of hardened steel is done by its_______?
12 / 50
Soap kettle used in the production of laundry soap is made of______?
13 / 50
Silicon percentage in acid resistant cast iron is about_________?
14 / 50
Rubber lined pumps can be used to pump__________?
15 / 50
Rotary driers are generally made of________?
16 / 50
Refined acetic acid storage vessel are made of_____?
17 / 50
Spray dryer for evaporating milk to produce milk powder is made of__________?
18 / 50
Shock resisting steels should possess high_____?
19 / 50
Presence of high phosphorous in cast iron increases its______?
20 / 50
Reduction in the grain size reduces the ________ of the material?
21 / 50
SO3 is absorbed using H2SO4 in a______?
22 / 50
Spark plugs, ignition tubes and electrodes are made of nickel _____ alloys?
23 / 50
Purity of electrical grade aluminium should be ? ______ percent?
24 / 50
Stainless steel contains__________?
25 / 50
Steel balls for ball bearings are generally made of _______ steel?
26 / 50
Steel will respond to hardening by heat treatment processes, only when the minimum carbon content in it is ______ percent?
27 / 50
Reactor used in the production of polyvinyl chloride (PVC) is made of______?
28 / 50
Slow plastic deformation of metals under a constant stress is termed as ______ failure?
29 / 50
Rotary kilns in cement industry are lined with ______bricks?
30 / 50
Presence of 0.3 to 0.5% arsenic in copper increases its______?
31 / 50
Slow and progressive deformation of a material with time under constant stress is called_____?
32 / 50
Silicone rubber is not resistant to the corrosive action of______?
33 / 50
Residual magnetism in steel for magnets is increased by the addition of___________?
34 / 50
Steel tower used for the storage of oleum_________?
35 / 50
Straight silicon steel (containing Si from 0.5 to 5%) because of their low hysteresis loss and high magnetic permeability are used for electrical appliances. Which of the following electrical appliances made of silicon steel contains maximum percentage of silicon (about 4%) ?
36 / 50
Rubber lined vessels are corroded by the action of___________?
37 / 50
Sulphuric acid is mixed with ground phosphate rock (to produce phosphoric acid) in a steel digestor lined with___________?
38 / 50
Presence of high amount of silicon in cast iron_________?
39 / 50
Presence of even 0.005% of ______ in copper makes it highly brittle, rendering it useless for wire-drawing?
40 / 50
Silicon percentage in iron castings to have maximum hardness should be about___________?
41 / 50
Sulphur melting pit in the sulphuric acid plant is made of___________?
42 / 50
Specify the material of construction suitable for handling concentrated HNO3 at 100?C ?
43 / 50
Silico-manganese steels (containing 0.7% Mn, 0.5% C and 2% Si)_____?
44 / 50
Presence of nickel in steel improves its__________?
45 / 50
Steel pipes are normally manufactured by _______ process?
46 / 50
Presence of even very minute amount (say 0.1%) of _______ in copper, reduces its electrical conductivity very seriously?
47 / 50
Presence of manganese in alloy steel improves its_____?
48 / 50
Sulphuric acid pickling tanks are lined with___________?
49 / 50
Sherardizing process is used for___________?
50 / 50
Steel rods are used in reinforced concrete to increase its _______ strength?
Provide Your Information
Your score is
The average score is 0%
Restart quiz
