Civil Engineering Quiz 21
1 / 50
Cartesian form of the equation of catenary is________?
2 / 50
Detailed plotting is generally done by_______?
3 / 50
The length of the lap in a compression member is kept greater than bar diameter x (Permissible stress in bar / Five times the bond stress) or___________?
4 / 50
In R.C sewer pipes, the percentage longitudinal reinforcement to the cross-sectional area of concrete is kept_______?
5 / 50
Which of the following angles can be set out with the help of French cross staff?
6 / 50
The entrance and exit curves of a rotary have______?
7 / 50
Which of the following spillways is least suitable for an earthen dam ?
8 / 50
The ?outlet discharge factor? is the duty at the head of________?
9 / 50
The tendency of a liquid surface to contract is due to the following property________?
10 / 50
The stiffness of the close coil helical spring is________?
11 / 50
The total pressure on the surface of a vertical sluice gate 2 m x 1 m with its top 2 m surface being 0.5 m below the water level will be___________?
12 / 50
Pick up the correct statement from the following ?
13 / 50
The velocity of flow does not depend on______?
14 / 50
The sequence of four stages of survey in a highway alignment is_____?
15 / 50
The settling velocity of a spherical particle of diameter less than 0.1 mm as per Stock?s law, is_________?
16 / 50
The two point problem and three point problem are methods of_______?
17 / 50
Which of the following timbers is suitable for making sports goods ?
18 / 50
The main reinforcement in the heel of a T-shaped R.C retaining wall is provided on_____?
19 / 50
The group index for a soil, whose liquid limit is 40 percent, plasticity index is 10 percent and percentage passing 75 micron IS sieve is 35, is_____?
20 / 50
Pick up the correct statement from the following?
21 / 50
A firm borrows P2,000 for 6 years at 8%. At the end of 6 years, it renews the loan for the amount due plus P2,000 more for 2 years at 8%. What is the lump sum due ?
22 / 50
The heaviest I-section for same depth is________?
23 / 50
Lands, buildings, plants and machineries are example of what type of asset ?
24 / 50
Scientific planning of transportation system and mass transit facilities in cities should be based on_____________?
25 / 50
Under ordinary simple interest, how many days in one year ?
26 / 50
Dynamic viscosity of most of the gases with rise in temperature__________?
27 / 50
The rise of water table below the foundation influences the bearing capacity of soil mainly by reducing______?
28 / 50
Which of the following methods of con-touring is most suitable for a hilly terrain ?
29 / 50
Which one of the following attributes is not associated with digital maps______?
30 / 50
A heavy stone is suitable for_______?
31 / 50
Workability of concrete is directly proportional to_______?
32 / 50
Diagonal tension in a beam_____?
33 / 50
Which of the following tests measures the toughness of road aggregates ?
34 / 50
As per Lacey?s theory, the silt factor is________?
35 / 50
The maximum number of vehicles beyond which the rotary may not function efficiently is_____?
36 / 50
The factor responsible for purification of sewage in river is_______?
37 / 50
Time of concentration_______?
38 / 50
The number of steps in a flight generally should not be less than_______?
39 / 50
The profit derived from a project or business enterprise without consideration of obligations to financial contributors and claims of others based on profit is known as ____________?
40 / 50
Coarse grained soils are best compacted by a______?
41 / 50
The ratio of the diameter of reinforcing bars and the slab thickness is______?
42 / 50
The shape of the camber, best suited for cement concrete pavements, is______?
43 / 50
The statical method of plastic analysis satisfies______?
44 / 50
A cantilever of length 2 cm and depth 10 cm tapers in plan from a width 24 cm to zero at its free end. If the modulus of elasticity of the material is 0.2 ? 106 N/mm2, the deflection of the free end, is_______?
45 / 50
In case the factor of safety against sliding is less than 1.5, a portion of slab is constructed downwards at the end of the heel slab, which is known as__________?
46 / 50
For beams breadth is constant_________?
47 / 50
The point in the immersed body through which the resultant pressure of the liquid may be taken to act is known as___________?
48 / 50
Cross cut saw is used for______?
49 / 50
The discharge through a V- notch varies as_____?
50 / 50
Flat spiral springs______?
Provide Your Information
Your score is
The average score is 0%
Restart quiz
