CS601-Midterm
1 / 50
Line configuration refers to the way two or more devices attach to a ______.
2 / 50
Amplitude in ASK is more resistive to EMI and Noise.
3 / 50
Frequency band in which 99% of the total power resides is called_______
4 / 50
representation of links that connect nodes is called as physical topology.
5 / 50
6 / 50
Asynchronous transmission is ___________
7 / 50
A set of devices connected by communication links is called networking
8 / 50
At the ______________layer, a DCE takes data generated by a DTE.
9 / 50
Set of rules that govern communication is called
10 / 50
is a multipoint topology.
11 / 50
Layers 5, 6 and 7 also called as network support layers.
12 / 50
Effective network mean that the network has fast delivery, timeliness and
13 / 50
14 / 50
Which is not an element of protocol
15 / 50
A 56k modem can download at a rate of __________ Kbps and upload at a rate of __________ Kbps.
16 / 50
ASK, PSK, FSK and QAM are examples of ____ modulation.
17 / 50
The _______________ layer changes bits into electromagnetic signals.
18 / 50
_________ requires more bandwidth.
19 / 50
Data link layer deals with mechanical and electrical specifications of transmission medium and interface
20 / 50
F.M.In differential Manchester we require two transition or signal changes to represent binary_____
21 / 50
Time domain plot show changes in signal phase with respect to time.
22 / 50
The __________ generates the data and passes it along with any control information to a ___________.
23 / 50
The bit rate always equals the baud rate in which type of signal?
24 / 50
Which topology requires a central controller or hub?
25 / 50
Internet with small “i” specifies the world wide Network the actual internet.
26 / 50
Packet switching is a connection oriented service.
27 / 50
Which one best describes the given statement: "To allow multiple users to share total capacity of a transmission medium"
28 / 50
There are _____ possible variations of 16 QAM.
29 / 50
Unidirectional traffic movement is overcome by dual ring technology.
30 / 50
A human brain is considered as a ___________
31 / 50
We need ____________ to decompose a composite signal into its components.
32 / 50
33 / 50
DC component is also termed as Direct current component or a component with non-zero frequency.
34 / 50
ASK, PSK, FSK and QAM are examples of modulation.
35 / 50
36 / 50
Data chunk at data link layer is called
37 / 50
OSI model was developed prior to TCP/IP model.
38 / 50
39 / 50
Which one is not among standard creation committee.
40 / 50
41 / 50
A sine wave must be an analog signal.
42 / 50
_____________ converts an analog signal into a digital signal.
43 / 50
In transmission the timing of the signal is unimportant.
44 / 50
45 / 50
Number of signal units per second that are required to represent a bit is called bit rate.
46 / 50
The internet model consists of _________ layers.
47 / 50
48 / 50
3dB is also called as power bandwidth.
49 / 50
_________requires the maximum number of I/O ports.
50 / 50
Frequency of a failure and network recovery time after a failure is measures of the ____________ of a network.
Your score is
The average score is 56%
Restart quiz
