How to clean the bathroom mirror?

How to clean the bathroom mirror

The mirror in the bathroom is unsatisfactory because it leaves a lot of dirt after cleaning the bathroom. In fact, if you devise a cleaning method a little, you can cleanly remove water stains, oil films, and scale stains. This time, I would like to introduce the method after adding anti-fogging of the mirror after cleaning.

mirror dirt identity

If you leave the dirt on the mirror in the bathroom for a long time, it will become a stubborn stain that will not come off without you knowing it. Commonly known as scales and water stains. If this happens, even if you wipe and clean frequently, the scale-like dirt and uneven oil film will not come off easily and you will not be able to handle it. How come you don’t fall like this? Why? In fact, there is a cause in the ingredients of the dirt that adheres.

What is the dirt on the bathroom mirror

The dirt on the mirror in the bathroom is a mixture of detergent and sebum. Sebum is an acidic oil, so it forms an oil film, and detergent is alkaline dirt, and when you wash your body together, it scatters and adheres to the mirror. As a result, both “acidic” and “alkaline” dirt adheres, so it is not straightforward and becomes stubborn dirt. So how do you get rid of stubborn stains?

How to clean the mirror

Here’s a step-by-step guide on how to clean your bathroom mirror. Follow the steps below to thoroughly remove scale stains and oil films.

  1. Remove stains from the bathroom mirror
  2. scrape the dirt off the bathroom mirror
  3. Prevent dirt from sticking to the mirror in the bathroom

By following these steps, you can clean the stains.

Step 1: Remove dirt from the mirror in the bathroom

The first thing to do is pour water over the entire glass surface of the mirror attached to the washing area in the bathroom. By applying water, you can soften the dirt component. Dirt becomes softer = dirt moves more easily, so it becomes much easier to remove stubborn dirt. I think that cleaning the bathroom is often done at this time, so it’s a good idea to spray the entire bathroom with water.

Effective with hot water and baking soda

If the glass of the mirror is already cloudy when water is poured on it, or if it is dirty with a clear scale pattern that does not disappear, pouring hot water instead of water will make it easier to remove the dirt. You can use baking soda cleaner as an auxiliary item. Baking soda is alkaline, so it makes it easier to remove stubborn stains such as soap scum.

It looks beautiful at first glance

If you wash it with water, especially baking soda and wash it with hot water, you will feel that it has become relatively clean, but if you accept it here and finish it, it will return to its original state. That’s because the dirt just floated up and wasn’t removed. That doesn’t make sense, so I’ll explain how to remove dirt in the next chapter.

Step 2: Scoop dirt off the mirror in the bathroom

The dirt on the mirror has softened and is easier to remove, but the dirt still remains on the mirror in the bathroom. Or, make full use of the method to effectively remove the dirt, and sweep away the dirt left on the mirror.

Useful items for removing scales

Use a special polishing pad to remove scale stains. You can also clean water stains and scales stuck to the glass. You can also use aluminum foil instead. Use this to polish the surface of the mirror and thoroughly remove any stubborn stains on the glass surface.

If the dirt is persistent

For stubborn stains that cannot be removed by the above methods, it is effective to soak them in water and leave them for a while to soften the stains. After spraying the dirt, you can remove the dirt quite cleanly by rubbing it with a polishing pad or aluminum foil.

For coated mirrors

In the case of mirrors attached to recent unit baths, many mirrors have an anti-fog coating, and we do not recommend this type of mirror because the coating film will come off if you rub it with a polishing pad or aluminum foil. In such a case, there are cleaners available online or on the market for removing limescale, so use them.

Usage tips

As a tip for how to use it, I will spray it with a feeling that it spreads thinly over the whole. While spraying out, slide the spray from right to left and spray slowly. At this time, it is a trick to prevent over-washing by applying too much detergent and keeping it so that it does not drip. Wait a little while, then wash it off with water before it dries, then blow it up to clean it up.

Read Also: How can I dry my laundry faster on rainy days?

Step 3: Prevent dirt from sticking to the mirror in the bathroom

Once you have finished cleaning the mirror, you should do some finishing work to keep it clean. If you don’t do this, the mirror you’ve taken the trouble to clean will get dirty in a few days, and the ingredients left after washing will breed mold and make it look bad.

Surrounding finish

As a common example, the edge of the part that supports the mirror is darkened. This is mold. It is generated by feeding the dirt that has flowed out when washing the mirror and the dirt ingredients that have been left behind when washing. Anti-mold ingredients in detergents are not nutrients, but dirt ingredients such as dissolved sebum are a feast for mold. If you leave it alone, it will become a hotbed of dirt, so let’s remove it as well.

How to use fungicide

Here, if you use a mildew remover that is also used around other water, it will come off cleanly. As a precaution, pay attention to the ingredients of the detergent. There is nothing to worry about with oxygen-based substances, but among chlorine-based substances, there are some that attack the resin parts such as the walls of the bathtub, so if left unblown for a long time, It will cause cracks and stains. As a countermeasure, wash it clean and place the main unit on aluminum foil to prevent it from dripping onto the floor.

Anti-fouling method

Even if you clean it thoroughly, if it is a mirror without a coating, it will get dirty quickly, so we recommend that you apply a coating. By applying a coating, a film is applied to the glass surface, making it difficult for oil films to adhere. If you don’t do this, there will definitely be a difference in how dirty it gets, so we recommend that you do aftercare even if it takes time.

How to prevent fogging

One more point, if it fogs up quickly even if it is cleaned, you should apply an anti-fog coating. It is easy to use, and can be easily applied by spreading the anti-fogging liquid with a sponge, and after application, you can bathe comfortably with a mirror that does not fog up even when exposed to steam. By all means, I would like to take advantage of this. As a substitute, you can use the one for the car, but we recommend the one for the bathroom, which is optimized for humid environments.

How to use the anti-fog film

There are also more convenient items for those who do not clean regularly and those who want to experience the anti-fog effect more easily. It is an anti-fog film that you just stick and peel off. With this, after cleaning, you can stick it on and get a coating and anti-fogging effect, and if you start to worry about scales and water stains, you can easily maintain the cleanliness almost as before by peeling it off. There are restrictions on size, etc., so it is recommended for those who match.

One more step after daily bathing

If you take a little time after bathing every day, it will definitely make your care easier. In the case of bathing, detergent and shampoo will inevitably scatter and adhere to the mirror. In general, it feels like it’s been diluted by the steam, and it doesn’t bother me that much at that time, but the dirt components will stick to it and accumulate. Rinse it with cold water after taking a bath to keep it clean. You can also use cold water to prevent mold growth.

It is even more effective when the water is drained.

If you take one more step, the maintenance rate of cleanliness will increase. After rinsing with cold water, wipe the water off the mirror with a handy wiper. By doing so, you can remove the cause of scale stains from impurities such as chlorine in the water.


The feature this time is about cleaning the mirror, which tends to be rough when cleaning the bath. If you take good care of the mold in the corners of the mirror and the bathroom, you can make the bathroom look quite clean. By all means, let’s practice at home to appeal to your cleaning skills.