This is a DIY special feature for kitchens with many storage items. We collected storage examples and DIY ideas for various items in the kitchen such as home appliances such as dishes and ranges, spices and trash cans. We hope that it will be helpful for you to create a stylish and comfortable kitchen interior.
What is kitchen storage DIY?
We will introduce handmade ideas for kitchen storage with many items such as home appliances, tableware, and stock ingredients. You can easily make your own racks that hold heavy home appliances with a sense of stability and shelves that you want to make to the perfect height using DIY goods such as Lovelico.
First, let’s check storage items and storage locations
Before you start crafting, first check the items to be stored and where to store them. The point is the size of the storage space and the approximate weight of the stored items. If you can’t decide where to put it, consider using a kitchen wagon with casters. You can also increase the amount of storage by reviewing the sink space in your kitchen.
Kitchen storage DIY “Cupboard”
First of all, we will introduce DIY examples of cupboards and simple production tips. If you use Lavrico and Dear Wall, it is easy to create a cafe-style open rack on the wall, and you can easily restore it to its original state even if you are renting.
① Self-made example of wall cupboard
This is a storage idea that attaches an open rack for tableware to the wall with Lovelico. The stored tableware itself becomes an interior item, and you can create a warm space like a cafe. This is a great idea for people who like to collect tableware.
material
- Lubrico (2×4 Adjuster) … 2 or more
- Wood for Lubrico (2 x 4) … 2 or more
- Lumber for shelves (one-by lumber)…required quantity
- Shelf receiving brackets…required number
- Necessary number of screws
- Level…Available at 100 Yen shop
If you want to hide the wall by hammering a board like the introduction image, we recommend thin one-by lumber. It’s easy to make, but tableware is heavy, so pay attention to the load capacity when choosing shelf brackets.
easy recipe
- Determine the shelf width and cut the wood for the shelf.
- Attach Love Recore Adjusters to both ends of the 2×4 lumber, and erect pillars on the wall at intervals of 10cm from the shelf width.
- Attach the shelf bracket to the part -5 cm from the back side edge of the shelf wood.
- Position the shelf by placing the level on the shelf and mark the posts.
- Install the shelf with screws according to the markings and you are done.
The weight of the dishes may bend the shelf. For the spacing between pillars, it is a good idea to refer to actual production examples.
Read Also: Should I wash my glasses?
Recommended item introduction
“Love Lico 2×4 Adjuster”
This item can be attached to both ends of a 2×4 material and used as a pillar. It can be installed in the same way as a tension rod, and it can be easily attached to the floor or ceiling even for rentals.
“Shelf bracket”
It is a metal fitting indispensable for setting up an open shelf. There are not only simple ones, but also iron ones that can be used as stylish decorations. Please note that each load capacity is different.
(2) Self-made example of a cupboard with a movable shelf
If you want to put a pillar on the wall with wood that is wider than Lubrico, such as 2×6 wood, we recommend Deer Wall. This is a self-made cupboard idea that uses the width of the wood and attaches a ladder-like movable shelf to the wall.
material
- Deer Wall (2 x 6 Deer Wall S) … 2 or more
- Wood for deer wall (2 x 6) … 2 or more
- Lumber for shelves (1 x 6 or 2 x 6)…required number
- Shelving pillars…required number
- Shelf receiving brackets for shelf pillars…required number
- Necessary number of screws
easy recipe
- Determine the shelf width and cut the wood for the shelf.
- Attach the shelf posts to the 2×6 lumber.
- Attach a deer wall to both ends of the 2×6 lumber and put up a pillar on the wall.
- Attach the shelf brackets to the wood for the shelf.
- Attach the shelf to the pole.
If you want to color the wood, it is recommended before assembly. It is easier to align the position if you install the shelf posts before erecting the posts, but you can also install the shelf posts after the posts have been erected before and after the process.
How to make a shelf is just one example! Please look for shelf brackets that match the image.
Recommended item introduction
“Deer Wall”
It is an item that can be attached to both ends of the wood and used as a pillar. It can be installed in the same way as a tension rod like Rabrico, and you can easily create a wall shelf.
③ Self-made example of a cupboard with doors
A cupboard with doors made of plywood that makes use of the natural texture of wood. Since the tableware is not visible, it can be placed in the living room other than the kitchen. Invisible storage makes life smaller and prevents dust from entering.
Kitchen storage DIY “microwave stand”
If you make your own microwave oven for large home appliances, you can use the upper space. Here are some DIY ideas that will make your kitchen look stylish by tidying up your home appliances.
(1) An example of a compact microwave oven
It is a mini table-shaped range stand. It is convenient to place home appliances such as a toaster on top of the range. In addition, since the top is open, it is also useful for storing home appliances that emit steam, such as kettle pots. Ideas for using dead space in the kitchen.
(2) Self-made example of a range table with a storage shelf
This is an example of a microwave stand with an open shelf attached to the dead space above the microwave with shelf brackets. Since the upper space of the range may heat up, it is recommended for storing small kitchen appliances such as mixers and kitchen equipment such as Tupperware.
(3) Self-made example of a scaffold board microwave stand
This is a handmade example of a range table using old materials with a vintage feel “scaffold board”. Each scaffolding board has its own personality such as paint marks, and it goes well with a kitchen with a handsome interior. If you use a cutting service at the time of purchase, it is a good idea to draw an assembly diagram and determine the size of the rack in advance.
Recommended item introduction
“Scaffolding boards”
can be purchased on the Internet such as Amazon and Rakuten. One of the reasons for its popularity is its durability, which allows it to hold home appliances such as heavy ranges, but since it is old wood, there may be variations in its condition.
“Slide rail”
is a metal fitting that makes the opening and closing of the drawer smooth. It is convenient to use when you want to make a drawer on the microwave stand or a place to store home appliances that emit steam, such as a rice cooker and a pot. Rails are used by screwing them in two places, the rack side and the drawer side.
④ Self-made example of wall surface range stand
This is a self-made example of a range stand combined with Labrico wall storage. If you want to make a microwave oven rack for large appliances, add more posts to make it four legs. Small home appliances and rice cookers are also compactly arranged, making it recommended for small single-family homes.
Kitchen storage DIY “kitchen wagon”
Here are some handmade ideas for a kitchen wagon that is convenient for storing food and small home appliances. If you have a compact wagon, you can easily make your own with 100% materials.
(1) Self-made example of a wagon for storing vegetables
This is an example of a self-made kitchen wagon using airy wire mesh that is ideal for storing vegetables and fruits. Wire mesh can also be purchased at 100 Yen Seria, and it is sold in three sizes of S, M, and L under the product name “Interior mesh frame”.
material
- Interior mesh frame (L size) … 2 pieces
- Sticks (1 x 1, about 50 cm) … 4
- Nails…required number
- bond
easy recipe
- Mark the position where the frame will be attached to the stick.
- Complete by gluing the sticks to the four corners of the frame.
Because it is a small rack, if you want to make it easily, we recommend using a bond that can be glued in a short time. If you are concerned about the strength, it is a good idea to reinforce with nails after gluing.
(2) Self-made example of top tile pasting
If you want to use it as a kitchen work space or serving table, we recommend tiling the top plate. The tiles have excellent heat resistance, so it is convenient to place hot frying pans and pots. Please refer to the following for a simple tiling procedure. Tiling is also convenient for arranging existing furniture.
material
- Tiles…required number
- Bond…woodworking bond, etc.
- Curing tape…Thick one is recommended
- Tile joint material
- sponge or cloth
easy recipe
- Apply protective tape around the work area to protect it from dirt.
- Spread the bond over the entire surface of the area to be tiled.
- Arrange the tiles with an interval of about 3 mm.
- Prepare grout material.
- Once the tiles are attached, spread the grout over the entire surface.
- Wait until the grout is semi-dry.
- Wipe off excess grout from the tile surface with a damp sponge or cloth.
- When the grout is completely dry, you are done.
(3) Self-made example with a home appliance storage space
This is a hand-made example of a large-capacity kitchen wagon that can be used as a workbench, with small home appliances such as a mixer on the bottom, ingredients in the middle, and a workbench on the top. A large-capacity rack that can be fully loaded with kitchen utensils is also convenient if it is a wagon with casters that does not block the flow line.
material
- Two-by material for legs (about 70 cm) … 4 pieces
- Shelf plywood or wooden box … 3 pieces
- Screws…required amount
- Caster…required amount
easy recipe
- Line up the wood for the legs and mark the shelf.
- Drill a screw hole in the marking part.
- Screw the legs to the shelf board (or wooden box) to complete the rack.
- Drill screw holes on the back of the legs and attach casters to complete the kitchen wagon.
Kitchen storage DIY “Accessory storage”
Next, we will introduce examples of handmade storage that are perfect for spices and small kitchen items. A collection of ideas that can be stored in a small space such as a small rack or a small wall shelf.
(1) Example of a slatted shelf
We also recommend using a slatted rack to easily make a small item holder. If you use a gridiron that can be purchased at 100 yen, the material cost is cheap and it is easy.
material
- Drainboard … 5 pieces
- Bond for woodwork…required amount
- Nails…required amount
You can buy small grates even at 100 yen shops. If you are interested, please take a look at the nearby 100 yen store.
easy recipe
- Apply wood glue to both ends of the back of the shelf slats.
- Place the shelf slats on the leg slats and attach them.
- Fix the shelf with nails, and when the bond dries, you’re done.
If you want to paint with oil etc., it is recommended before assembly. Before painting, prepare the substrate with sandpaper before working on it.
(2) Self-made example of full-screw rack
This is an example of making a spice rack using long bolts called “full screws”. As a rustic and strong stylish kitchen storage, it blends well with handsome interiors. It is easy to make and has the advantage of being easy to adjust the height of the shelf. Also, if you use a sturdy shelf board, it can be used for storing small home appliances.
material
- Fully threaded bolt … 4 pieces
- Nuts and washers for all threaded bolts…16 each
- Wood for shelves (1 x 4 lumber, etc.) … 2 pieces already cut to the required size
Here I will show you how to make a simple two-tier rack. If you want to use offcuts on hand for the wood for the shelves, it is better to use materials other than MDF that are resistant to water.
easy recipe
- Drill holes for bolts in the four corners of the wood for the shelf with an electric drill.
- Pass the metal fittings and the wood for the shelf through the bolts in the order of “(1) nut, (2) washer, (3) wood for the shelf, (4) washer, and (4) nut” and fix them at the desired height.
- Pass the rest of the metal fittings and the wood for the shelf through the bolts in the same order, fix them at the desired height, and you’re done.
If you want to increase the number of shelves, it is a good idea to pass the materials through the nuts in the order of step 2. The charm of all screw shelves is that they can be arranged freely.
Recommended item introduction
It is used in conjunction with the “full screw bolt”
nut and washer. All threaded spice racks are used on posts. It is difficult to cut at home, so it is recommended to decide the desired length in advance before purchasing.
“Nut”
An item that becomes the tip of a bolt and is used in conjunction with a washer. All-threaded spice racks are fixed by sandwiching the shelf from the top and bottom.
“Washer”
is an item for stabilizing the nut, and it is used by passing it through the bolt together with the nut. On fully threaded spice racks, it is sandwiched between the nut and the shelf.
③ Example of making your own woodworking rack
This is a warm wooden spice rack. With slotted posts, you can easily adjust the size to create a handmade rack that’s just right for your kitchen. Also, if you want to fix it more firmly as a wall storage, you can use Lubrico or Deer Wall.
(4) Self-made example of perforated board storage
This is an example of a handmade storage space for cooking utensils and spices by installing a perforated board on the wall around the sink. If you have a perforated board that can be used for a wide range of purposes such as shelves and hooks, you can create a large amount of storage on the wall. It is also an idea to decorate the discerning cookware itself.
⑤ Self-made example of wall storage
This is a storage utilization idea that shows handmade wall storage using iron shelf holders. The handmade shelf itself serves as an interior decoration, not only for storing spices and kitchen utensils, but also for creating a natural atmosphere.
Kitchen storage DIY “trash can storage”
There are two points for trash can storage: “ease of use” and “reduction of dead space”. Also, since it is an item that makes it easy to feel like living, it is also a point to “hide” it if you are trying to create a stylish interior.
① Example of making a slatted trash can storage
It is a handmade storage with casters that can neatly store 3 trash cans. The square-shaped slatted rack surrounds the trash can, so you can conveniently place small items on top of the trash can, which tends to become dead space. It also has the advantage of being easy to clean.
material
- Drainboard … 4 pieces
- Caster … 4
- Necessary number of screws
- woodworking bond
easy recipe
- Place the bottom plate and top plate on the back side of the left and right slatted geta to form a square shape. (At this time, make sure that the left, right, and top sides are facing out.)
- Fix the saw with wood glue and screws.
- Completed by attaching casters to the back of the bottom plate.
(2) Example of making your own movable trash can
It is an idea to attach a 100-yen houseplant stand with casters to the bottom of the trash can. If the trash can itself is movable, it will be easier to clean and store. Attaching an anti-vibration adhesive mat to the stand with casters prevents the trash can from slipping. It’s a useful idea when you want to store it under a shelf that you can’t usually see.
③ Self-made example with remodeled color box
This is a self-made trash can storage idea that completely hides a 45L trash can. It is a stylish trash can that can be used as a decorative shelf and blends in with the interior. It is convenient for separating cans and plastics, not for garbage.
material
- Color box … 1 unit
- Metal fitting for handle … 1
- Hinges … 4 pieces
- Magnet catch … 1
If you want to arrange the garbage slot, please prepare a cork board.
easy recipe
- Assemble the color box in a square shape with only the left and right sides, top surface, and bottom surface.
- Divide the MDF board for the back of the color box into two, one for the door and one for the inlet. (approximately 2/3)
- Attach the MDF board with the handle to the color box body with hinges.
- Attach magnetic catches to the door and body.
- Attach hinges to the remaining MDF board, and attach the garbage inlet lid.
summary
It was an introduction of DIY ideas that make kitchen storage expedite. Wall storage and trash racks that seem difficult at first glance can be easily realized by remodeling Lubrico and color boxes. I hope this helps you create a stylish kitchen with plenty of storage.